1. Product Introduction:

S-OUT Series turning seat is a kind of equipment to make easy entrance of cars, taxi,
ambulance and etc. It can work stable, reliable and safe. Loading capacity can be 100KG.
It is operated by switch. Turning seat can stop at any position you want by pressing
the switch.

Description:

This seat makes easy entrance of cars, taxi, ambulance and etc.
It is operated by user;
Working voltage can be 12V or 24V;
Water-proof connectors;
There is warning sound during working;
 Working noise is less than 70dB;
Every turning seat has SN which is for track and make after-sales easy;
 

Installation:

Wholly assembled and easy installation
At the front seat or middle seat of car
Put seat 50mm near door, and distance between seat front end and door sheet
should be over 280mm
 

Application: car, taxi and etc

A. (red) Door frame width ≥680mm

Measuring position: Start from the position 5cm above the door bottom frame

B. (green) Seat surface vertically above the ground

Measuring position: from the seat top surface to the floor

C. (yellow) Door bottom frame vertically above the groud

Measuring position: from the bottom frame to the floor

D. (blue) Seat surface vertically above the inner car floor

Measuring position: from the seat top surface to the inner car floorboard

E. (purple) Door top frame vertically above the door bottom frame ≥930mm

Measuring position: take the left-most and 5cm above the bottom frame as start position, to the top

Note: the instrument desk protrudes from the door frame<100mm