1. INTRODUCTION
S-LIFT swivel & lifting seat is to bring easy entrance to peoplewith reduced or limited mobility. It can be applied on cars, buses, taxi, ambulance, SUV and etc. You may remote control the swivel and lifting of the seat and stop it on any position as you desired.
Its load capacity reaches 120kg. The swivel seat will work stably, reliably and safely, so you can enjoy the convenience it may bring to you regardless of it safety.
2. APPLICATION
- MPV, van, minivan, SUV
- Handicapped car
- Ambulance
3. OPERATION
Remote control or use the button switch to control the seat lifting and rotating.
4. INSTALLATION
- At the front seat or middle seat of MPV
- Seat shall be 50mm near door
- Distance between seat front end and door sheet shall be over 280mm
Model | Net door width | Clear width inside car | Size from base to outside of car | Distance between seat front and door sheet |
S-LIFT | 720mm | 660mm | Less than 240mm | Over 280 mm |
5. SAFETY
- Non-skid seat step
- With warning sound during working
- With red emergency button for any emergency stop
6. SPECIFICATIONS
Model | S-LIFT-1 | S-LIFT-2 |
Dimension | 714*660*217mm | 639*660*217mm |
Lifting Height | 395mm | 300mm |
Overall Length (fully extended) | 1600mm |
Base Thickness | 217mm |
Drive Mode | electric |
Operation | remote control |
Max operating Current | 12A |
Rated Voltage | 12-24V |
Own Weight | 68kg |
Load Capacity | 120kg |
Test Load Weight | 150kg |
Working Noise | <70dB |
Rotate Angle | 0~120° |
Safe Grade | IP67 |